Working with Resin

Use resin for XYZ... Nancy to replace with more "generic" marketing language here for overall page

Grain Sealer is ideal for a wide variety of woods and cures in less than 5 minutes with exposure to direct sunlight or UV sunlamp bulbs. It’s suitable for application on any wood, from hardwood to thermally modified wood, as well as most composite materials.

Shop resin, grain filler, and flashlights below.

​TIP: If you want a taller, thicker dome, start off by placing your bottle of Doming Resin in a cup of ice water for about 5 minutes. To make the ice water colder still, mix in a little table salt. This will make your resin thicker and stand taller. Conversely, if you want your dome to be a thinner protective coating like a shellac, start by putting your bottle of Doming Resin in a cup of hot water for 5 minutes, (say about the same temperature of coffee but not scalding hot coffee). This will reduce the starting viscosity of your resin.        

WARNING

 

Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

Cancer & Reproductive Harm - www.P65Warnings.ca.gov

bello_opal_logo_R_.jpg